Initial boot
ok reset-all Resetting ... Software Power ON @(#) Sun Ultra 5/10 UPA/PCI 3.15 Version 2 created 1998/11/10 10:35 Clearing E$ Tags Done Clearing I/D TLBs Done Probing Memory Done MEM BASE = 0000.0000.1000.0000 MEM SIZE = 0000.0000.0800.0000 11-Column Mode Enabled MMUs ON Copy Done PC = 0000.01ff.f000.1fec PC = 0000.0000.0000.2030 Decompressing into Memory Done Size = 0000.0000.0006.e660 ttya initialized Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0 UltraSPARC-IIi 2-2-2 module Probing Memory Bank #0 64 + 64 : 128 Megabytes Probing Memory Bank #2 64 + 64 : 128 Megabytes Probing UPA Slot at 1e,0 Nothing There Probing /pci@1f,0/pci@1,1 at Device 1 pci108e,1000 network Probing /pci@1f,0/pci@1,1 at Device 2 SUNW,m64B Probing /pci@1f,0/pci@1,1 at Device 3 ide disk cdrom Probing /pci@1f,0/pci@1 at Device 1 Nothing there Probing /pci@1f,0/pci@1 at Device 2 Nothing there Probing /pci@1f,0/pci@1 at Device 3 Nothing there Probing /pci@1f,0/pci@1 at Device 4 Nothing there Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0 UltraSPARC-IIi 2-2-2 module Probing Memory Bank #0 64 + 64 : 128 Megabytes Probing Memory Bank #2 64 + 64 : 128 Megabytes Probing UPA Slot at 1e,0 Nothing There Probing /pci@1f,0/pci@1,1 at Device 1 pci108e,1000 network Probing /pci@1f,0/pci@1,1 at Device 2 SUNW,m64B Probing /pci@1f,0/pci@1,1 at Device 3 ide disk cdrom Probing /pci@1f,0/pci@1 at Device 1 Nothing there Probing /pci@1f,0/pci@1 at Device 2 Nothing there Probing /pci@1f,0/pci@1 at Device 3 Nothing there Probing /pci@1f,0/pci@1 at Device 4 Nothing there Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 270MHz), No Keyboard OpenBoot 3.15, 256 MB memory installed, Serial #16777215. Ethernet address ff:ff:ff:ff:ff:ff, Host ID: ffffffff. The IDPROM contents are invalid Boot device: net File and args: Internal loopback test -- Did not receive expected loopback packet. Evaluating: boot Can't open boot device ok
ok boot disk Boot device: /pci@1f,0/pci@1,1/ide@3/disk@0,0 File and args: Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54. FCode UFS Reader 1.11 97/07/10 16:19:15. Loading: /platform/SUNW,Ultra-5_10/ufsboot Loading: /platform/sun4u/ufsboot SunOS Release 5.8 Version Generic_117350-12 64-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Invalid format code in IDprom. WARNING: Time-of-day chip had incorrect date; check and reset. configuring IPv4 interfaces: hme0. Hostname: dennou The / file system (/dev/rdsk/c0t0d0s0) is being checked. /dev/rdsk/c0t0d0s0: 59066 files, 2059263 used, 1468104 free /dev/rdsk/c0t0d0s0: (17112 frags, 181374 blocks, 0.4% fragmentation) The system is coming up. Please wait. NIS domainname is idm.fluxcoil.net starting rpc services: rpcbind keyserv done. Setting netmask of hme0 to 255.255.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway dennou syslog service starting. Print services started. volume management starting. The system is ready. dennou console login:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.1 (GENERIC) #0: Fri May 31 08:43:59 UTC 2019 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/sparc64/compile/GENERIC total memory = 256 MB avail memory = 233 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root): SUNW,Ultra-5_10 (Sun Ultra 5/10 UPA/PCI): hostid 80c0ffee cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 270 MHz, CPU id 0 cpu0: manuf 17, impl 12, mask 13 cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l) psycho0 at mainbus0 addr 0xfffc4000 psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0 pci0 at psycho0 pci0: i/o space, memory space enabled ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x13) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled ebus0 at pci1 dev 1 function 0 ebus0: Sun Microsystems PCIO Ebus2, revision 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power at ebus0 addr 724000-724003 ipl 25 not configured SUNW,pll at ebus0 addr 504000-504002 not configured sab0 at ebus0 addr 400000-40007f ipl 2b: rev 3.2 sabtty0 at sab0 port 0: console i/o sabtty1 at sab0 port 1 com0 at ebus0 addr 3083f8-3083ff ipl 29: ns16550a, working fifo kbd0 at com0 com1 at ebus0 addr 3062f8-3062ff ipl 2a: ns16550a, working fifo ms0 at com1 wsmouse0 at ms0 mux 0 lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 22 fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 27 not configured clock0 at ebus0 addr 0-1fff: mk48t59 flashprom at ebus0 addr 0-fffff not configured audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 23 ipl 24: CS4231A audio0 at audiocs0: full duplex, playback, capture, mmap audiocs0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 audiocs0: Latency: 256 milliseconds spkr0 at audio0: PC Speaker (synthesized) hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1 hme0: interrupting at ivec 3021 hme0: Ethernet address 08:00:20:c0:ff:ee nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto machfb0 at pci1 dev 2 function 0: ATI Technologies 3D Rage Pro (rev. 0x5c) machfb0: using MMIO aperture machfb0: 16 MB aperture at 0xe1000000, 4 KB registers at 0xe2000000 machfb0: 128 KB ROM at 0xe1020000 ref_div: 33 mclk_fb_div: 228 minref: 450 m: 31 machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz post_div: 2 log2_post_div: 1 mclk_div: 228 target: 94500 output: 94151 machfb0: initializing the DSP xclks_per_qw 134 133 machfb0: initial resolution 1152x900 at 8 bpp post_div: 2 log2_post_div: 1 mclk_div: 228 target: 94500 output: 94151 machfb0: initializing the DSP xclks_per_qw 134 133 wsdisplay1 at machfb0 kbdmux 1 wsmux1: connecting to wsdisplay1 wsdisplay1: screen 0-3 added (default) direct rendering for machfb0 unsupported cmdide0 at pci1 dev 3 function 0: CMD Technology PCI0646 (rev. 0x03) cmdide0: bus-master DMA support present cmdide0: primary channel configured to native-PCI mode cmdide0: using ivec 1820 for native-PCI interrupt atabus0 at cmdide0 channel 0 cmdide0: secondary channel configured to native-PCI mode atabus1 at cmdide0 channel 1 ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x13) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled pcons at mainbus0 not configured timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "tick-counter" frequency 270000000 Hz quality 100 No counter-timer -- using %tick at 270MHz as system clock. wskbd0 at kbd0 mux 1 kbd0: reset failed wskbd0: connecting to wsdisplay1 wd0 at atabus0 drive 0 wd0: <ST34321A> wd0: drive supports 32-sector PIO transfers, LBA addressing wd0: 4103 MB, 8894 cyl, 15 head, 63 sec, 512 bytes/sect x 8404830 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) wd0(cmdide0:0:0): using PIO mode 4, DMA mode 2 (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: <CRD-8322B, 1998/06/30, 1.03> cdrom removable cd0: drive supports PIO mode 4, DMA mode 2 cd0(cmdide0:1:0): using PIO mode 4, DMA mode 2 (using DMA) WARNING: 7 errors while detecting hardware; check system log. root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/sparc64/8.1/modules