User Tools
Sidebar
software:dmesg:playstation4_linux
[ 0.000000] ps4: x86_ps4_early_setup: PS4 early setup [ 0.000000] Linux version 5.3.18-gcf76ce01e (ITmania@ps4.local) (gcc version 10.3.1 20210422 (Red Hat 10.3.1-1) (GCC)) #1 SMP Mon Mar 7 20:18:48 JST 2022 [ 0.000000] Command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000007fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000008000-0x000000000007ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000080000-0x0000000000099fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000003fffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000400000-0x000000000047ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000480000-0x000000000067ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000680000-0x00000000006fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000700000-0x000000007efe7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007efe8000-0x000000007efeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007eff0000-0x000000007effffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000140000000-0x000000027effffff] usable [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000d0340000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.1 present. [ 0.000000] DMI: , BIOS unde Wed 09/01/2021 5:2 [ 0.000000] ps4: Unable to measure TSC frequency, assuming default. [ 0.000000] tsc: Detected 1594.000 MHz processor [ 0.001828] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001830] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001840] last_pfn = 0x27f000 max_arch_pfn = 0x400000000 [ 0.007356] MTRR default type: uncachable [ 0.007357] MTRR fixed ranges enabled: [ 0.007359] 00000-9FFFF write-back [ 0.007360] A0000-BFFFF uncachable [ 0.007361] C0000-FFFFF write-back [ 0.007362] MTRR variable ranges enabled: [ 0.007364] 0 base 0000000000 mask FF80000000 write-back [ 0.007366] 1 base 0100000000 mask FF00000000 write-back [ 0.007367] 2 base 0200000000 mask FF80000000 write-back [ 0.007369] 3 base 0100000000 mask FFC0000000 uncachable [ 0.007369] 4 disabled [ 0.007370] 5 disabled [ 0.007370] 6 disabled [ 0.007371] 7 disabled [ 0.007372] TOM2: 000000027f000000 aka 10224M [ 0.008004] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.015370] e820: update [mem 0x80000000-0x13fffffff] usable ==> reserved [ 0.015379] last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.026811] Using GB pages for direct mapping [ 0.031187] BRK [0x07c01000, 0x07c01fff] PGTABLE [ 0.031192] BRK [0x07c02000, 0x07c02fff] PGTABLE [ 0.031194] BRK [0x07c03000, 0x07c03fff] PGTABLE [ 0.031308] BRK [0x07c04000, 0x07c04fff] PGTABLE [ 0.031744] BRK [0x07c05000, 0x07c05fff] PGTABLE [ 0.031749] BRK [0x07c06000, 0x07c06fff] PGTABLE [ 0.032297] RAMDISK: [mem 0x1d800000-0x1dbfdfff] [ 0.036954] ACPI: Early table checksum verification disabled [ 0.042647] ACPI: RSDP 0x00000000000E0000 000024 (v02 SIE ) [ 0.048426] ACPI: XSDT 0x00000000000E0088 00004C (v01 SIE ORBIS 20121218 INTL 20110211) [ 0.057008] ACPI: FACP 0x00000000000E016C 0000F4 (v04 SIE ORBIS 20130205 INTL 20110211) [ 0.065593] ACPI: DSDT 0x00000000000E0430 00018C (v02 SIE ORBIS 20121002 INTL 20110211) [ 0.074175] ACPI: FACS 0x00000000000E012C 000040 [ 0.078813] ACPI: FACS 0x00000000000E012C 000040 [ 0.083452] ACPI: APIC 0x00000000000E0298 00006C (v02 SIE ORBIS 20120725 INTL 20110211) [ 0.092029] ACPI: MCFG 0x00000000000E0304 00003C (v01 SIE ORBIS 20120725 INTL 20110211) [ 0.100606] ACPI: SSDT 0x00000000000E0730 0001EC (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.109183] ACPI: IVRS 0x00000000000E091C 000054 (v01 F0F PS4KEXEC 20161225 KEXC 20161225) [ 0.117769] ACPI: Local APIC address 0xfee00000 [ 0.117838] No NUMA configuration found [ 0.121689] Faking a node at [mem 0x0000000000000000-0x000000027effffff] [ 0.128435] NODE_DATA(0) allocated [mem 0x27effa000-0x27effdfff] [ 0.134517] Zone ranges: [ 0.137058] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.143271] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.149486] Normal [mem 0x0000000100000000-0x000000027effffff] [ 0.155700] Movable zone start for each node [ 0.159988] Early memory node ranges [ 0.163577] node 0: [mem 0x0000000000001000-0x0000000000007fff] [ 0.169879] node 0: [mem 0x0000000000080000-0x0000000000099fff] [ 0.176180] node 0: [mem 0x0000000000100000-0x00000000003fffff] [ 0.182482] node 0: [mem 0x0000000000480000-0x000000000067ffff] [ 0.188783] node 0: [mem 0x0000000000700000-0x000000007efe7fff] [ 0.195085] node 0: [mem 0x000000007f000000-0x000000007fffffff] [ 0.201386] node 0: [mem 0x0000000140000000-0x000000027effffff] [ 0.207714] Zeroed struct page in unavailable ranges: 503 pages [ 0.207716] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff] [ 0.220756] On node 0 totalpages: 1830409 [ 0.220758] DMA zone: 57 pages used for memmap [ 0.220759] DMA zone: 13 pages reserved [ 0.220760] DMA zone: 3617 pages, LIFO batch:0 [ 0.220882] DMA32 zone: 8128 pages used for memmap [ 0.220883] DMA32 zone: 520168 pages, LIFO batch:63 [ 0.238988] Normal zone: 20416 pages used for memmap [ 0.238993] Normal zone: 1306624 pages, LIFO batch:63 [ 0.278687] ACPI: Local APIC address 0xfee00000 [ 0.278701] ACPI: No IOAPIC entries present [ 0.282904] Using ACPI for processor (LAPIC) configuration information [ 0.289471] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.294489] [mem 0xfc000000-0xffffffff] available for PCI devices [ 0.300625] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.446237] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.454615] percpu: Embedded 37 pages/cpu s113304 r8192 d30056 u262144 [ 0.461201] pcpu-alloc: s113304 r8192 d30056 u262144 alloc=1*2097152 [ 0.461203] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.461246] Built 1 zonelists, mobility grouping on. Total pages: 1801795 [ 0.468161] Policy zone: Normal [ 0.471315] Kernel command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0 [ 0.490419] printk: log_buf_len individual max cpu contribution: 65536 bytes [ 0.497506] printk: log_buf_len total cpu_extra contributions: 458752 bytes [ 0.504507] printk: log_buf_len min size: 65536 bytes [ 0.509793] printk: log_buf_len: 524288 bytes [ 0.514170] printk: early log buf free: 57508(87%) [ 0.521841] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.531342] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.539285] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.619369] Memory: 7094080K/7321636K available (14339K kernel code, 576K rwdata, 4612K rodata, 916K init, 1348K bss, 227556K reserved, 0K cma-reserved) [ 0.633248] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.639941] rcu: Hierarchical RCU implementation. [ 0.644667] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.652379] NR_IRQS: 4352, nr_irqs: 128, preallocated irqs: 0 [ 0.658278] do_IRQ: 0.49 No irq handler for vector [ 0.663117] Console: colour dummy device 80x25 [ 1.282067] printk: console [tty0] enabled [ 1.913037] printk: console [ttyS0] enabled [ 1.917315] ACPI: Core revision 20190703 [ 1.921377] ACPI: setting ELCR to 0200 (from ffff) [ 1.926269] Failed to register legacy timer interrupt [ 1.931413] APIC: Switch to symmetric I/O mode setup [ 1.965032] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x16fa00e7d19, max_idle_ns: 440795227561 ns [ 1.975775] Calibrating delay loop (skipped), value calculated using timer frequency.. 3188.00 BogoMIPS (lpj=1594000) [ 1.976767] pid_max: default: 32768 minimum: 301 [ 1.976767] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.976767] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.976767] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 1.976767] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 [ 1.976767] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.976767] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available! [ 1.976767] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.976767] Freeing SMP alternatives memory: 40K [ 1.976767] smpboot: CPU0: AMD DG1501SML87LB (family: 0x16, model: 0x43, stepping: 0x0) [ 1.976958] Performance Events: AMD PMU driver. [ 1.977772] ... version: 0 [ 1.978769] ... bit width: 48 [ 1.979769] ... generic registers: 4 [ 1.980769] ... value mask: 0000ffffffffffff [ 1.981769] ... max period: 00007fffffffffff [ 1.982769] ... fixed-purpose events: 0 [ 1.983769] ... event mask: 000000000000000f [ 1.984836] rcu: Hierarchical SRCU implementation. [ 1.985977] smp: Bringing up secondary CPUs ... [ 1.986922] x86: Booting SMP configuration: [ 1.987771] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 1.998843] smp: Brought up 1 node, 8 CPUs [ 2.000771] smpboot: Max logical packages: 1 [ 2.001771] smpboot: Total of 8 processors activated (25504.00 BogoMIPS) [ 2.005167] devtmpfs: initialized [ 2.005948] random: get_random_u32 called from bucket_table_alloc.isra.0+0x6f/0x150 with crng_init=0 [ 2.006856] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 2.007783] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 2.009877] prandom: seed boundary self test passed [ 2.011654] prandom: 100 self tests passed [ 2.011886] NET: Registered protocol family 16 [ 2.012828] audit: initializing netlink subsys (disabled) [ 2.013793] audit: type=2000 audit(0.038:1): state=initialized audit_enabled=0 res=1 [ 2.013911] i2c-core: driver [dummy] registered [ 2.014794] cpuidle: using governor ladder [ 2.018789] cpuidle: using governor menu [ 2.020795] ACPI: bus type PCI registered [ 2.021817] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 2.022774] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 2.023790] PCI: Using configuration type 1 for base access [ 2.030229] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 2.032813] cryptd: max_cpu_qlen set to 1000 [ 2.035905] ACPI: Added _OSI(Module Device) [ 2.036771] ACPI: Added _OSI(Processor Device) [ 2.037770] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.038769] ACPI: Added _OSI(Processor Aggregator Device) [ 2.039770] ACPI: Added _OSI(Linux-Dell-Video) [ 2.040770] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 2.041770] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 2.043052] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 2.043896] ACPI: SCI (IRQ9) allocation failed [ 2.044771] ACPI Error: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20190703/evevent-96) [ 2.045769] ACPI: Unable to start the ACPI Interpreter [ 2.046770] ACPI Error: Could not remove SCI handler (20190703/evmisc-247) [ 2.057798] vgaarb: loaded [ 2.059783] SCSI subsystem initialized [ 2.060785] libata version 3.00 loaded. [ 2.060848] usbcore: registered new interface driver usbfs [ 2.061786] usbcore: registered new interface driver hub [ 2.062825] usbcore: registered new device driver usb [ 2.063879] Advanced Linux Sound Architecture Driver Initialized. [ 2.064794] PCI: Probing PCI hardware [ 2.065771] PCI: root bus 00: using default resources [ 2.065773] PCI: Probing PCI hardware (bus 00) [ 2.065800] PCI host bridge to bus 0000:00 [ 2.066775] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.067771] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff] [ 2.068773] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.069786] pci 0000:00:00.0: [1022:1436] type 00 class 0x060000 [ 2.070853] pci 0000:00:00.2: [1022:1437] type 00 class 0x080600 [ 2.071858] pci 0000:00:01.0: [1002:9924] type 00 class 0x030000 [ 2.072784] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xe3ffffff 64bit pref] [ 2.073776] pci 0000:00:01.0: reg 0x18: [mem 0xe4000000-0xe47fffff 64bit pref] [ 2.074774] pci 0000:00:01.0: reg 0x20: [io 0x6000-0x60ff] [ 2.075774] pci 0000:00:01.0: reg 0x24: [mem 0xe4800000-0xe483ffff] [ 2.076774] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 2.077773] pci 0000:00:01.0: enabling Extended Tags [ 2.078793] pci 0000:00:01.0: supports D1 D2 [ 2.079771] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 2.080809] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 2.081767] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.081785] pci 0000:00:01.1: [1002:9921] type 00 class 0x040300 [ 2.082782] pci 0000:00:01.1: reg 0x10: [mem 0xe4840000-0xe4843fff 64bit] [ 2.083788] pci 0000:00:01.1: enabling Extended Tags [ 2.084790] pci 0000:00:01.1: supports D1 D2 [ 2.086785] pci 0000:00:02.0: [1022:1438] type 00 class 0x060000 [ 2.087847] pci 0000:00:14.0: [104d:90c8] type 00 class 0x088000 [ 2.088788] pci 0000:00:14.0: reg 0x10: [mem 0xfdf8000000-0xfdf9ffffff 64bit] [ 2.089776] pci 0000:00:14.0: reg 0x18: [io 0x1000-0x10ff] [ 2.090792] pci 0000:00:14.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.091810] pci 0000:00:14.0: supports D1 [ 2.092770] pci 0000:00:14.0: PME# supported from D0 D1 D3hot [ 2.093837] pci 0000:00:14.1: [104d:90c9] type 00 class 0x088001 [ 2.094788] pci 0000:00:14.1: reg 0x10: [mem 0xc4000000-0xc4003fff 64bit] [ 2.095798] pci 0000:00:14.1: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.096804] pci 0000:00:14.1: supports D1 [ 2.097770] pci 0000:00:14.1: PME# supported from D0 D1 D3hot [ 2.098825] pci 0000:00:14.2: [104d:90ca] type 00 class 0x088002 [ 2.099787] pci 0000:00:14.2: reg 0x10: [mem 0xc8000000-0xc8000fff 64bit] [ 2.100792] pci 0000:00:14.2: reg 0x24: [mem 0xc8001000-0xc8001fff] [ 2.101776] pci 0000:00:14.2: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.102804] pci 0000:00:14.2: supports D1 [ 2.103770] pci 0000:00:14.2: PME# supported from D0 D1 D3hot [ 2.104825] pci 0000:00:14.3: [104d:90cb] type 00 class 0x088003 [ 2.105787] pci 0000:00:14.3: reg 0x10: [mem 0xcc000000-0xcc000fff 64bit] [ 2.106797] pci 0000:00:14.3: reg 0x30: [mem 0x00000000-0x00000fff pref] [ 2.107804] pci 0000:00:14.3: supports D1 [ 2.108770] pci 0000:00:14.3: PME# supported from D0 D1 D3hot [ 2.109825] pci 0000:00:14.4: [104d:90cc] type 00 class 0x088004 [ 2.110787] pci 0000:00:14.4: reg 0x10: [mem 0xd0000000-0xd00fffff 64bit] [ 2.111779] pci 0000:00:14.4: reg 0x18: [mem 0xd0100000-0xd0107fff 64bit] [ 2.112779] pci 0000:00:14.4: reg 0x20: [mem 0xd0200000-0xd03fffff 64bit] [ 2.113776] pci 0000:00:14.4: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.114804] pci 0000:00:14.4: supports D1 [ 2.115770] pci 0000:00:14.4: PME# supported from D0 D1 D3hot [ 2.116825] pci 0000:00:14.5: [104d:90cd] type 00 class 0x088005 [ 2.117787] pci 0000:00:14.5: reg 0x10: [mem 0xd4000000-0xd4000fff 64bit] [ 2.118779] pci 0000:00:14.5: reg 0x18: [mem 0xd4001000-0xd4001fff 64bit] [ 2.119786] pci 0000:00:14.5: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.120804] pci 0000:00:14.5: supports D1 [ 2.121770] pci 0000:00:14.5: PME# supported from D0 D1 D3hot [ 2.122824] pci 0000:00:14.6: [104d:90ce] type 00 class 0x088006 [ 2.123787] pci 0000:00:14.6: reg 0x10: [mem 0xd8000000-0xd8000fff 64bit] [ 2.124779] pci 0000:00:14.6: reg 0x18: [mem 0x80000000-0xbfffffff 64bit] [ 2.125776] pci 0000:00:14.6: reg 0x20: [mem 0xd9100000-0xd91fffff] [ 2.126776] pci 0000:00:14.6: reg 0x24: [mem 0xd9000000-0xd903ffff] [ 2.127776] pci 0000:00:14.6: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.128804] pci 0000:00:14.6: supports D1 [ 2.129770] pci 0000:00:14.6: PME# supported from D0 D1 D3hot [ 2.130830] pci 0000:00:14.7: [104d:90cf] type 00 class 0x088007 [ 2.131787] pci 0000:00:14.7: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit] [ 2.132779] pci 0000:00:14.7: reg 0x18: [mem 0xdc200000-0xdc3fffff 64bit] [ 2.133779] pci 0000:00:14.7: reg 0x20: [mem 0xdc400000-0xdc5fffff 64bit] [ 2.134776] pci 0000:00:14.7: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.135804] pci 0000:00:14.7: supports D1 [ 2.136770] pci 0000:00:14.7: PME# supported from D0 D1 D3hot [ 2.137822] pci 0000:00:18.0: [1022:142e] type 00 class 0x060000 [ 2.138823] pci 0000:00:18.1: [1022:142f] type 00 class 0x060000 [ 2.139822] pci 0000:00:18.2: [1022:1430] type 00 class 0x060000 [ 2.140822] pci 0000:00:18.3: [1022:1431] type 00 class 0x060000 [ 2.141833] pci 0000:00:18.4: [1022:1432] type 00 class 0x060000 [ 2.142821] pci 0000:00:18.5: [1022:1433] type 00 class 0x060000 [ 2.143822] pci 0000:00:18.6: [1022:1434] type 00 class 0x060000 [ 2.144824] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.148111] PCI: pci_cache_line_size set to 64 bytes [ 2.148148] e820: reserve RAM buffer [mem 0x00008000-0x0000ffff] [ 2.148151] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 2.148153] e820: reserve RAM buffer [mem 0x00680000-0x006fffff] [ 2.148154] e820: reserve RAM buffer [mem 0x7efe8000-0x7fffffff] [ 2.148156] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff] [ 2.148341] Bluetooth: Core ver 2.22 [ 2.148779] NET: Registered protocol family 31 [ 2.149770] Bluetooth: HCI device and connection manager initialized [ 2.150773] Bluetooth: HCI socket layer initialized [ 2.151771] Bluetooth: L2CAP socket layer initialized [ 2.152774] Bluetooth: SCO socket layer initialized [ 2.153950] clocksource: Switched to clocksource tsc-early [ 2.159531] pnp: PnP ACPI: disabled [ 2.165388] thermal_sys: Registered thermal governor 'step_wise' [ 2.165419] pci 0000:00:01.0: BAR 6: assigned [mem 0xfc080000-0xfc09ffff pref] [ 2.178914] pci 0000:00:14.0: BAR 6: assigned [mem 0xfc0a0000-0xfc0affff pref] [ 2.186283] pci 0000:00:14.1: BAR 6: assigned [mem 0xfc0b0000-0xfc0bffff pref] [ 2.193652] pci 0000:00:14.2: BAR 6: assigned [mem 0xfc0c0000-0xfc0cffff pref] [ 2.201021] pci 0000:00:14.4: BAR 6: assigned [mem 0xfc0d0000-0xfc0dffff pref] [ 2.208390] pci 0000:00:14.5: BAR 6: assigned [mem 0xfc0e0000-0xfc0effff pref] [ 2.215759] pci 0000:00:14.6: BAR 6: assigned [mem 0xfc0f0000-0xfc0fffff pref] [ 2.223128] pci 0000:00:14.7: BAR 6: assigned [mem 0xfc100000-0xfc10ffff pref] [ 2.230498] pci 0000:00:14.3: BAR 6: assigned [mem 0xfc110000-0xfc110fff pref] [ 2.237871] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 2.243550] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff] [ 2.250160] NET: Registered protocol family 2 [ 2.254789] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.263525] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 2.271818] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.279739] TCP: Hash tables configured (established 65536 bind 65536) [ 2.286521] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.293496] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.301041] NET: Registered protocol family 1 [ 2.305835] RPC: Registered named UNIX socket transport module. [ 2.311885] RPC: Registered udp transport module. [ 2.316680] RPC: Registered tcp transport module. [ 2.321475] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.328306] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.336846] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0 [ 2.343332] pci 0000:00:02.0: CLS mismatch (64 != 512), using 64 bytes [ 2.350126] Trying to unpack rootfs image as initramfs... [ 2.447763] Freeing initrd memory: 4088K [ 2.451932] pci 0000:00:00.2: can't find IRQ for PCI INT A; please try using pci=biosirq [ 2.460704] pci 0000:00:14.0: Adding to iommu group 0 [ 2.465894] pci 0000:00:14.1: Adding to iommu group 0 [ 2.471073] pci 0000:00:14.2: Adding to iommu group 0 [ 2.476252] pci 0000:00:14.3: Adding to iommu group 0 [ 2.481429] pci 0000:00:14.4: Adding to iommu group 0 [ 2.486609] pci 0000:00:14.5: Adding to iommu group 0 [ 2.491789] pci 0000:00:14.6: Adding to iommu group 0 [ 2.496966] pci 0000:00:14.7: Adding to iommu group 0 [ 2.502128] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 2.507723] pci 0000:00:00.2: AMD-Vi: Extended features (0x840): [ 2.513846] IA [ 2.515628] AMD-Vi: Interrupt remapping enabled [ 2.520470] AMD-Vi: Lazy IO/TLB flushing enabled [ 2.527520] amd_uncore: AMD NB counters detected [ 2.532241] amd_uncore: AMD LLC counters detected [ 2.537437] LVT offset 0 assigned for vector 0x400 [ 2.542541] perf: AMD IBS detected (0x000000ff) [ 2.547457] kvm: Nested Virtualization enabled [ 2.551991] kvm: Nested Paging enabled [ 2.556189] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 2.569352] Initialise system trusted keyrings [ 2.573968] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 2.584133] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.588789] fuse: init (API version 7.31) [ 2.600991] NET: Registered protocol family 38 [ 2.605533] Key type asymmetric registered [ 2.609712] Asymmetric key parser 'x509' registered [ 2.614694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.622236] io scheduler mq-deadline registered [ 2.626853] io scheduler kyber registered [ 2.645196] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.651988] Non-volatile memory driver v1.3 [ 2.656320] Linux agpgart interface v0.103 [ 2.660743] [drm] amdgpu kernel modesetting enabled. [ 2.665835] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xe3ffffff [ 2.675247] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xe4000000 -> 0xe47fffff [ 2.684654] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xe4800000 -> 0xe483ffff [ 2.694064] amdgpu 0000:00:01.0: vgaarb: deactivate vga console [ 2.701179] brd: module loaded [ 2.707651] loop: module loaded [ 2.710889] i2c-core: driver [at24] registered [ 2.710899] i2c-core: driver [eeprom] registered [ 2.711082] aeolia_pcie 0000:00:14.4: apcie_probe() [ 2.711133] aeolia_pcie 0000:00:14.4: apcie glue probe [ 2.716378] aeolia_pcie 0000:00:14.4: Aeolia chip revision: 94273110:098eb110:02000100 [ 2.724467] aeolia_pcie 0000:00:14.4: apcie_create_irq_domain [ 2.724477] aeolia_pcie 0000:00:14.4: apcie_assign_irqs(23) [ 2.724687] apcie_msi_init((____ptrval____), (____ptrval____), 1, 0x400, (____ptrval____)) [ 2.724691] apcie_msi_init((____ptrval____), (____ptrval____), 2, 0x401, (____ptrval____)) [ 2.724693] apcie_msi_init((____ptrval____), (____ptrval____), 3, 0x402, (____ptrval____)) [ 2.724694] apcie_msi_init((____ptrval____), (____ptrval____), 4, 0x403, (____ptrval____)) [ 2.724696] apcie_msi_init((____ptrval____), (____ptrval____), 5, 0x404, (____ptrval____)) [ 2.724697] apcie_msi_init((____ptrval____), (____ptrval____), 6, 0x405, (____ptrval____)) [ 2.724699] apcie_msi_init((____ptrval____), (____ptrval____), 7, 0x406, (____ptrval____)) [ 2.724700] apcie_msi_init((____ptrval____), (____ptrval____), 8, 0x407, (____ptrval____)) [ 2.724702] apcie_msi_init((____ptrval____), (____ptrval____), 9, 0x408, (____ptrval____)) [ 2.724703] apcie_msi_init((____ptrval____), (____ptrval____), 10, 0x409, (____ptrval____)) [ 2.724705] apcie_msi_init((____ptrval____), (____ptrval____), 11, 0x40a, (____ptrval____)) [ 2.724706] apcie_msi_init((____ptrval____), (____ptrval____), 12, 0x40b, (____ptrval____)) [ 2.724708] apcie_msi_init((____ptrval____), (____ptrval____), 13, 0x40c, (____ptrval____)) [ 2.724710] apcie_msi_init((____ptrval____), (____ptrval____), 14, 0x40d, (____ptrval____)) [ 2.724711] apcie_msi_init((____ptrval____), (____ptrval____), 15, 0x40e, (____ptrval____)) [ 2.724713] apcie_msi_init((____ptrval____), (____ptrval____), 16, 0x40f, (____ptrval____)) [ 2.724714] apcie_msi_init((____ptrval____), (____ptrval____), 17, 0x410, (____ptrval____)) [ 2.724716] apcie_msi_init((____ptrval____), (____ptrval____), 18, 0x411, (____ptrval____)) [ 2.724717] apcie_msi_init((____ptrval____), (____ptrval____), 19, 0x412, (____ptrval____)) [ 2.724719] apcie_msi_init((____ptrval____), (____ptrval____), 20, 0x413, (____ptrval____)) [ 2.724720] apcie_msi_init((____ptrval____), (____ptrval____), 21, 0x414, (____ptrval____)) [ 2.724722] apcie_msi_init((____ptrval____), (____ptrval____), 22, 0x415, (____ptrval____)) [ 2.724723] apcie_msi_init((____ptrval____), (____ptrval____), 23, 0x416, (____ptrval____)) [ 2.724737] aeolia_pcie 0000:00:14.4: apcie_assign_irqs returning 23 [ 2.724739] aeolia_pcie 0000:00:14.4: dev->irq=1 [ 2.725046] printk: console [ttyS0] disabled [ 2.729447] 0000:00:14.4: ttyS0 at MMIO 0xd0340000 (irq = 20, base_baud = 3656250) is a XScale [ 6.655718] printk: console [ttyS0] enabled [ 6.664307] 0000:00:14.4: ttyS1 at MMIO 0xd0341000 (irq = 21, base_baud = 3656250) is a XScale [ 6.681710] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000003) mask=0x8 irq=4 hwirq=0x403 (____ptrval____) [ 6.681713] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 3, addr fee00000 data: 0x00000003 (3) [ 6.681766] i2c i2c-0: adapter [icc] registered [ 6.710729] Turn ON BT/WLAN: ret=20, reply 00 00 00 00 [ 6.710783] input: Power Button as /devices/pci0000:00/0000:00:14.4/input/input0 [ 6.790775] ret=46, reply 00 00 02 00 00 00 1f 00 [ 6.805748] ret=20, reply 00 00 01 02 10 00 00 00 [ 6.820728] ret=20, reply 00 00 00 00 00 00 00 00 [ 6.830365] sky2: driver version 1.30 [ 6.837783] sky2 0000:00:14.1: Yukon-2 OptimaEEE chip revision 1 [ 6.849912] sky2 0000:00:14.1: apcie_assign_irqs(1) [ 6.849927] apcie_msi_init((____ptrval____), (____ptrval____), 24, 0x100, (____ptrval____)) [ 6.849930] sky2 0000:00:14.1: apcie_assign_irqs returning 1 [ 6.849940] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 (____ptrval____) [ 6.849942] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23) [ 6.850192] sky2 0000:00:14.1 eth0: addr 78:c8:81:22:02:66 [ 6.861354] xhci_aeolia 0000:00:14.7: apcie_assign_irqs(3) [ 6.861386] apcie_msi_init((____ptrval____), (____ptrval____), 25, 0x700, (____ptrval____)) [ 6.861388] apcie_msi_init((____ptrval____), (____ptrval____), 26, 0x701, (____ptrval____)) [ 6.861390] apcie_msi_init((____ptrval____), (____ptrval____), 27, 0x702, (____ptrval____)) [ 6.861393] xhci_aeolia 0000:00:14.7: apcie_assign_irqs returning 3 [ 6.861396] xhci_aeolia 0000:00:14.7: version 3.0 [ 6.861405] xhci_aeolia 0000:00:14.7: Belize SATA PHY init [ 7.059330] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large: [ 7.082795] clocksource: 'refined-jiffies' wd_now: fffb7010 wd_last: fffb6e18 mask: ffffffff [ 7.103632] clocksource: 'tsc-early' cs_now: 8374f9f538 cs_last: 8266e66da7 mask: ffffffffffffffff [ 7.125521] tsc: Marking TSC unstable due to clocksource watchdog [ 7.872456] xhci_aeolia 0000:00:14.7: PHY SET GEN3 [ 7.882090] xhci_aeolia 0000:00:14.7: Belize SATA PHY Trace length : 6 [ 8.895274] xhci_aeolia 0000:00:14.7: Align 90=0x5c [ 8.905110] clocksource: Switched to clocksource refined-jiffies [ 8.905158] xhci_aeolia 0000:00:14.7: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl ATA mode [ 8.935098] xhci_aeolia 0000:00:14.7: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 8.952211] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000019) mask=0x2 irq=26 hwirq=0x701 (____ptrval____) [ 8.952216] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 1, addr fee00000 data: 0x00000019 (25) [ 8.953108] scsi host0: ahci [ 8.958190] ata1: SATA max UDMA/133 abar m2097152@0xdc200000 port 0xdc200100 irq 26 [ 8.974096] xhci_aeolia_probe_one 0, controller is 90cf [ 8.984142] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 8.996094] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 1 [ 9.011187] xhci_aeolia 0000:00:14.7: hcc params 0x0228f66c hci version 0x100 quirks 0x0000001000010010 [ 9.030089] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000018) mask=0x1 irq=25 hwirq=0x700 (____ptrval____) [ 9.030091] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 0, addr fee00000 data: 0x00000018 (24) [ 9.030107] xhci_aeolia 0000:00:14.7: irq 25, io mem 0xdc000000 [ 9.042224] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 9.059079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.073074] usb usb1: Product: xHCI Host Controller [ 9.083071] usb usb1: Manufacturer: Linux 5.3.18-gcf76ce01e xhci-hcd [ 9.096071] usb usb1: SerialNumber: 0000:00:14.7 [ 9.105136] hub 1-0:1.0: USB hub found [ 9.113080] hub 1-0:1.0: 2 ports detected [ 9.121157] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 9.132068] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 2 [ 9.147065] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed [ 9.161081] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.177087] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 9.194056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.208052] usb usb2: Product: xHCI Host Controller [ 9.218051] usb usb2: Manufacturer: Linux 5.3.18-gcf76ce01e xhci-hcd [ 9.231051] usb usb2: SerialNumber: 0000:00:14.7 [ 9.240122] hub 2-0:1.0: USB hub found [ 9.248056] hub 2-0:1.0: 2 ports detected [ 9.256129] xhci_aeolia_probe_one 2, controller is 90cf [ 9.266067] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 9.277045] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 3 [ 9.293130] xhci_aeolia 0000:00:14.7: hcc params 0x0220f06c hci version 0x100 quirks 0x0000001000010010 [ 9.312045] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001a) mask=0x4 irq=27 hwirq=0x702 (____ptrval____) [ 9.312047] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 2, addr fee00000 data: 0x0000001a (26) [ 9.312066] xhci_aeolia 0000:00:14.7: irq 27, io mem 0xdc400000 [ 9.324040] debugfs: Directory '0000:00:14.7' with parent 'xhci' already present! [ 9.339084] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 9.356035] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.370030] usb usb3: Product: xHCI Host Controller [ 9.380027] usb usb3: Manufacturer: Linux 5.3.18-gcf76ce01e xhci-hcd [ 9.393025] usb usb3: SerialNumber: 0000:00:14.7 [ 9.402093] hub 3-0:1.0: USB hub found [ 9.410033] hub 3-0:1.0: 1 port detected [ 9.418090] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 9.429025] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 4 [ 9.444022] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed [ 9.449035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.457049] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.486038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 9.503008] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.508011] ata1.00: ATA-10: ST1000LM035-1RK172, SPS6, max UDMA/133 [ 9.516012] usb 1-2: new high-speed USB device number 2 using xhci_aeolia [ 9.517005] usb usb4: Product: xHCI Host Controller [ 9.517007] usb usb4: Manufacturer: Linux 5.3.18-gcf76ce01e xhci-hcd [ 9.517009] usb usb4: SerialNumber: 0000:00:14.7 [ 9.517055] hub 4-0:1.0: USB hub found [ 9.530034] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 9.544063] hub 4-0:1.0: 1 port detected [ 9.605118] usbcore: registered new interface driver uas [ 9.616025] usbcore: registered new interface driver usb-storage [ 9.628020] i8042: PNP: No PS/2 controller found. [ 9.637017] mousedev: PS/2 mouse device common for all mice [ 9.649041] usbcore: registered new interface driver xpad [ 9.660024] i2c /dev entries driver [ 9.667018] i2c-dev: adapter [icc] registered as minor 0 [ 9.667018] i2c-core: driver [i2c-slave-eeprom] registered [ 9.667226] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 9.684009] sdhci: Secure Digital Host Controller Interface driver [ 9.696982] sdhci: Copyright(c) Pierre Ossman [ 9.705010] sdhci-pci 0000:00:14.3: SDHCI controller found [104d:90cb] (rev 0) [ 9.720012] sdhci-pci 0000:00:14.3: apcie_assign_irqs(1) [ 9.720034] apcie_msi_init((____ptrval____), (____ptrval____), 28, 0x300, (____ptrval____)) [ 9.720040] sdhci-pci 0000:00:14.3: apcie_assign_irqs returning 1 [ 9.720089] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001b) mask=0x1 irq=28 hwirq=0x300 (____ptrval____) [ 9.720089] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 3, subfunc: 0, addr fee00000 data: 0x0000001b (27) [ 9.720089] mmc0: SDHCI controller on PCI [0000:00:14.3] using ADMA [ 9.720089] usb 1-2: New USB device found, idVendor=054c, idProduct=0c88, bcdDevice= 1.04 [ 9.721075] hidraw: raw HID events driver (C) Jiri Kosina [ 9.720975] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.720979] usb 1-2: Product: 4-Port USB 2.0 Hub [ 9.723059] usbcore: registered new interface driver usbhid [ 9.722974] usb 1-2: Manufacturer: Generic [ 9.726972] usbhid: USB HID core driver [ 9.728096] snd_hda_intel 0000:00:01.1: can't find IRQ for PCI INT B; please try using pci=biosirq [ 9.730306] NET: Registered protocol family 10 [ 9.730306] hub 1-2:1.0: USB hub found [ 9.731204] Segment Routing with IPv6 [ 9.731990] hub 1-2:1.0: 2 ports detected [ 9.734014] NET: Registered protocol family 17 [ 9.745029] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1 [ 9.746006] Bluetooth: RFCOMM TTY layer initialized [ 9.747005] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2 [ 9.747974] Bluetooth: RFCOMM socket layer initialized [ 9.752982] usb usb3-port1: over-current condition [ 9.758989] Bluetooth: RFCOMM ver 1.11 [ 9.775969] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.786963] Bluetooth: BNEP filters: protocol multicast [ 9.790973] mmc0: new ultra high speed SDR104 SDIO card at address 0001 [ 9.790965] Bluetooth: BNEP socket layer initialized [ 9.802962] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 9.814960] Bluetooth: HIDP socket layer initialized [ 9.825014] microcode: CPU0: patch_level=0x07043001 [ 9.825957] microcode: CPU1: patch_level=0x07043001 [ 9.834965] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_aeolia [ 9.835445] microcode: CPU2: patch_level=0x07043001 [ 9.859952] microcode: CPU3: patch_level=0x07043001 [ 9.869956] microcode: CPU4: patch_level=0x07043001 [ 9.879956] usb 2-2: New USB device found, idVendor=054c, idProduct=0c87, bcdDevice= 1.04 [ 9.879949] microcode: CPU5: patch_level=0x07043001 [ 9.896950] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.906942] microcode: CPU6: patch_level=0x07043001 [ 9.920943] microcode: CPU7: patch_level=0x07043001 [ 9.930944] usb 2-2: Product: 4-Port USB 3.0 Hub [ 9.939948] microcode: Microcode Update Driver: v2.2. [ 9.939948] AVX version of gcm_enc/dec engaged. [ 9.949941] usb 2-2: Manufacturer: Generic [ 9.959937] AES CTR mode by8 optimization enabled [ 9.961973] registered taskstats version 1 [ 9.968954] usb usb4-port1: over-current condition [ 9.976936] Loading compiled-in X.509 certificates [ 9.977167] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xe3ffffff [ 10.006949] hub 2-2:1.0: USB hub found [ 10.013931] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xe4000000 -> 0xe47fffff [ 10.013936] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xe4800000 -> 0xe483ffff [ 10.032945] hub 2-2:1.0: 2 ports detected [ 10.039929] amdgpu 0000:00:01.0: vgaarb: deactivate vga console [ 10.058937] random: fast init done [ 10.084925] usb 1-2.1: new high-speed USB device number 3 using xhci_aeolia [ 10.117989] amdgpu 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 10.134981] [drm] initializing kernel modesetting (GLADIUS 0x1002:0x9924 0x1002:0x9924 0x00). [ 10.151940] [drm] register mmio base: 0xE4800000 [ 10.161906] [drm] register mmio size: 262144 [ 10.169913] [drm] add ip block number 0 <cik_common> [ 10.179904] [drm] add ip block number 1 <gmc_v7_0> [ 10.189902] [drm] add ip block number 2 <cik_ih> [ 10.198902] [drm] add ip block number 3 <dce_v8_0> [ 10.208900] [drm] add ip block number 4 <gfx_v7_0> [ 10.218898] [drm] add ip block number 5 <cik_sdma> [ 10.227967] ACPI Error: AE_BAD_PARAMETER, Thread 1980206272 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20190703/utmutex-252) [ 10.232903] usb 1-2.1: New USB device found, idVendor=3384, idProduct=4216, bcdDevice= 6.22 [ 10.251894] ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20190703/utmutex-289) [ 10.268893] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.302887] usb 1-2.1: Product: USB4216 Smart Hub [ 10.312884] usb 1-2.1: Manufacturer: Microchip [ 10.348298] [drm] BIOS signature incorrect 3b 45 [ 10.357917] ATOM BIOS: 113-Roma-012 [ 10.364954] i2c-dev: adapter [AMDGPU i2c bit bus 0x90] registered as minor 1 [ 10.364954] i2c i2c-1: adapter [AMDGPU i2c bit bus 0x90] registered [ 10.364954] i2c i2c-1: found normal entry for adapter 1, addr 0x50 [ 10.367955] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 10.371908] hub 1-2.1:1.0: USB hub found [ 10.375955] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 10.379890] hub 1-2.1:1.0: 5 ports detected [ 10.386974] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 10.394971] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 10.394974] i2c i2c-1: Used 4 tries to read from client at 0x50: failed, timeout? [ 10.394976] i2c i2c-1: NAK from device addr 0x50 msg #0 [ 10.398983] i2c i2c-1: found normal entry for adapter 1, addr 0x51 [ 10.402969] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 10.410968] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 10.418967] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 10.426965] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 10.426967] i2c i2c-1: Used 4 tries to read from client at 0x51: failed, timeout? [ 10.426969] i2c i2c-1: NAK from device addr 0x51 msg #0 [ 10.430977] i2c i2c-1: found normal entry for adapter 1, addr 0x52 [ 10.434964] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 10.435916] usb 2-2.2: new SuperSpeed Gen 1 USB device number 3 using xhci_aeolia [ 10.442965] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 10.457941] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 10.465939] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 10.465942] i2c i2c-1: Used 4 tries to read from client at 0x52: failed, timeout? [ 10.465943] i2c i2c-1: NAK from device addr 0x52 msg #0 [ 10.469951] i2c i2c-1: found normal entry for adapter 1, addr 0x53 [ 10.470867] usb 2-2.2: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=20.01 [ 10.473940] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 10.487861] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.494956] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 10.501857] usb 2-2.2: Product: RTL9210B-CG [ 10.508954] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 10.510855] usb 2-2.2: Manufacturer: Realtek [ 10.517933] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 10.518794] i2c i2c-1: Used 4 tries to read from client at 0x53: failed, timeout? [ 10.518796] i2c i2c-1: NAK from device addr 0x53 msg #0 [ 10.518855] usb 2-2.2: SerialNumber: 012345681303 [ 10.519884] usb 2-2.2: USB controller 0000:00:14.7 does not support streams, which are required by the UAS driver. [ 10.531945] i2c i2c-1: found normal entry for adapter 1, addr 0x54 [ 10.549850] usb 2-2.2: Please try an other USB controller if you wish to use UAS. [ 10.552949] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 10.564864] usb 2-2.2: USB controller 0000:00:14.7 does not support streams, which are required by the UAS driver. [ 10.571925] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 10.585844] usb 2-2.2: Please try an other USB controller if you wish to use UAS. [ 10.592942] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 10.600842] usb-storage 2-2.2:1.0: USB Mass Storage device detected [ 10.607919] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 10.612839] i2c i2c-1: Used 4 tries to read from client at 0x54: failed, timeout? [ 10.612841] i2c i2c-1: NAK from device addr 0x54 msg #0 [ 10.613855] scsi host1: usb-storage 2-2.2:1.0 [ 10.615953] i2c i2c-1: found normal entry for adapter 1, addr 0x55 [ 10.624915] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 10.632914] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 10.640913] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 10.648912] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 10.648914] i2c i2c-1: Used 4 tries to read from client at 0x55: failed, timeout? [ 10.648915] i2c i2c-1: NAK from device addr 0x55 msg #0 [ 10.652923] i2c i2c-1: found normal entry for adapter 1, addr 0x56 [ 10.656910] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 10.664909] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 10.672908] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 10.680906] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 10.680908] i2c i2c-1: Used 4 tries to read from client at 0x56: failed, timeout? [ 10.680910] i2c i2c-1: NAK from device addr 0x56 msg #0 [ 10.684918] i2c i2c-1: found normal entry for adapter 1, addr 0x57 [ 10.688906] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 10.696904] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 10.704903] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 10.712901] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 10.712904] i2c i2c-1: Used 4 tries to read from client at 0x57: failed, timeout? [ 10.712905] i2c i2c-1: NAK from device addr 0x57 msg #0 [ 10.717828] i2c-dev: adapter [AMDGPU i2c bit bus 0x91] registered as minor 2 [ 10.717832] i2c i2c-2: adapter [AMDGPU i2c bit bus 0x91] registered [ 10.717837] i2c i2c-2: found normal entry for adapter 2, addr 0x50 [ 10.720900] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 10.728900] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 10.736898] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 10.744897] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 10.744899] i2c i2c-2: Used 4 tries to read from client at 0x50: failed, timeout? [ 10.744900] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 10.748909] i2c i2c-2: found normal entry for adapter 2, addr 0x51 [ 10.752895] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 10.760894] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 10.768893] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 10.776892] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 10.776894] i2c i2c-2: Used 4 tries to read from client at 0x51: failed, timeout? [ 10.776896] i2c i2c-2: NAK from device addr 0x51 msg #0 [ 10.780904] i2c i2c-2: found normal entry for adapter 2, addr 0x52 [ 10.784891] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 10.792889] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 10.800888] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 10.807814] usb 1-2.1.2: new low-speed USB device number 4 using xhci_aeolia [ 10.808889] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 10.822807] i2c i2c-2: Used 4 tries to read from client at 0x52: failed, timeout? [ 10.822809] i2c i2c-2: NAK from device addr 0x52 msg #0 [ 10.825917] i2c i2c-2: found normal entry for adapter 2, addr 0x53 [ 10.829904] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 10.837903] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 10.845902] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 10.853901] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 10.853903] i2c i2c-2: Used 4 tries to read from client at 0x53: failed, timeout? [ 10.853904] i2c i2c-2: NAK from device addr 0x53 msg #0 [ 10.857912] i2c i2c-2: found normal entry for adapter 2, addr 0x54 [ 10.861899] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 10.869898] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 10.877897] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 10.885895] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 10.885897] i2c i2c-2: Used 4 tries to read from client at 0x54: failed, timeout? [ 10.885899] i2c i2c-2: NAK from device addr 0x54 msg #0 [ 10.889907] i2c i2c-2: found normal entry for adapter 2, addr 0x55 [ 10.893894] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 10.901893] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 10.909892] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 10.917799] usb 1-2.1.2: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00 [ 10.917893] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 10.934790] i2c i2c-2: Used 4 tries to read from client at 0x55: failed, timeout? [ 10.934792] i2c i2c-2: NAK from device addr 0x55 msg #0 [ 10.934794] usb 1-2.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 10.934798] usb 1-2.1.2: Product: USB OPTICAL MOUSE [ 10.952882] i2c i2c-2: found normal entry for adapter 2, addr 0x56 [ 10.962864] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 10.970863] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 10.978861] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 10.986860] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 10.986863] i2c i2c-2: Used 4 tries to read from client at 0x56: failed, timeout? [ 10.986864] i2c i2c-2: NAK from device addr 0x56 msg #0 [ 10.990872] i2c i2c-2: found normal entry for adapter 2, addr 0x57 [ 10.994859] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 11.002858] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 11.010857] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 11.015120] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.7/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/0003:093A:2521.0001/input/input3 [ 11.018857] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 11.040774] i2c i2c-2: Used 4 tries to read from client at 0x57: failed, timeout? [ 11.040776] i2c i2c-2: NAK from device addr 0x57 msg #0 [ 11.040804] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:14.7-2.1.2/input0 [ 11.043933] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 11.081780] amdgpu 0000:00:01.0: VRAM: 1024M 0x0000000F00000000 - 0x0000000F3FFFFFFF (1024M used) [ 11.099772] amdgpu 0000:00:01.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 11.099774] ata1.00: configured for UDMA/133 [ 11.114766] [drm] Detected VRAM RAM=1024M, BAR=1024M [ 11.114769] [drm] RAM width 64bits UNKNOWN [ 11.123965] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 SPS6 PQ: 0 ANSI: 5 [ 11.133791] [TTM] Zone kernel: Available graphics memory: 3582064 KiB [ 11.141912] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.142777] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.142777] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 11.142787] sd 0:0:0:0: [sda] Write Protect is off [ 11.142787] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.142792] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.157755] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 11.157757] [TTM] Initializing pool allocator [ 11.157769] [TTM] Initializing DMA pool allocator [ 11.171759] usb 1-2.1.5: new full-speed USB device number 5 using xhci_aeolia [ 11.181804] [drm] amdgpu: 1024M of VRAM memory ready [ 11.290747] usb 1-2.1.5: New USB device found, idVendor=3384, idProduct=0001, bcdDevice= 0.01 [ 11.291740] [drm] amdgpu: 3072M of GTT memory ready. [ 11.308736] usb 1-2.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.318776] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 11.333730] usb 1-2.1.5: Product: Launch Configurable Keyboard (launch_1) [ 11.333733] usb 1-2.1.5: Manufacturer: System76 [ 11.368777] [drm] PCIE GART of 512M enabled (table at 0x0000000F0004B000). [ 11.382843] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.396736] [drm] Driver supports precise vblank timestamp query. [ 11.408761] sda: sda1 sda3 sda5 sda7 sda9 sda10 sda11 sda12 sda13 sda17 sda19 sda25 sda27 sda29 [ 11.408887] i2c-dev: adapter [card0-HDMI-A-1] registered as minor 3 [ 11.409724] i2c i2c-3: adapter [card0-HDMI-A-1] registered [ 11.409729] i2c i2c-3: found normal entry for adapter 3, addr 0x50 [ 11.410243] i2c i2c-3: Creating eeprom at 0x50 [ 11.410273] eeprom 3-0050: probe [ 11.410287] i2c i2c-3: client [eeprom] registered with bus id 3-0050 [ 11.410289] i2c i2c-3: found normal entry for adapter 3, addr 0x51 [ 11.410289] i2c i2c-3: found normal entry for adapter 3, addr 0x52 [ 11.410796] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 11.410289] i2c i2c-3: found normal entry for adapter 3, addr 0x53 [ 11.412030] i2c i2c-3: found normal entry for adapter 3, addr 0x54 [ 11.412030] i2c i2c-3: found normal entry for adapter 3, addr 0x55 [ 11.412082] i2c i2c-3: found normal entry for adapter 3, addr 0x56 [ 11.412396] i2c i2c-3: found normal entry for adapter 3, addr 0x57 [ 11.412701] [drm] AMDGPU Display Connectors [ 11.421719] [drm] Connector 0: [ 11.427713] [drm] HDMI-A-1 [ 11.433713] [drm] HPD1 [ 11.438714] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f [ 11.453709] [drm] Encoders: [ 11.459709] [drm] DFP1: INTERNAL_UNIPHY [ 11.467842] input: System76 Launch Configurable Keyboard (launch_1) as /devices/pci0000:00/0000:00:14.7/usb1/1-2/1-2.1/1-2.1.5/1-2.1.5:1.0/0003:3384:0001.0002/input/input4 [ 11.502829] [drm] fb mappable at 0x100167000 [ 11.511708] [drm] vram apper at 0x100000000 [ 11.519700] [drm] size 8294400 [ 11.525699] [drm] fb depth is 24 [ 11.532698] [drm] pitch is 7680 [ 11.540726] fbcon: amdgpudrmfb (fb0) is primary device [ 11.551719] hid-generic 0003:3384:0001.0002: input,hidraw1: USB HID v1.11 Keyboard [System76 Launch Configurable Keyboard (launch_1)] on usb-0000:00:14.7-2.1.5/input0 [ 11.551941] hid-generic 0003:3384:0001.0003: hiddev96,hidraw2: USB HID v1.11 Device [System76 Launch Configurable Keyboard (launch_1)] on usb-0000:00:14.7-2.1.5/input1 [ 11.553197] input: System76 Launch Configurable Keyboard (launch_1) System Control as /devices/pci0000:00/0000:00:14.7/usb1/1-2/1-2.1/1-2.1.5/1-2.1.5:1.2/0003:3384:0001.0004/input/input5 [ 11.571193] [drm:amdgpu_atombios_dp_link_train] *ERROR* clock recovery tried 5 times [ 11.571196] [drm:amdgpu_atombios_dp_link_train] *ERROR* clock recovery failed [ 11.606754] input: System76 Launch Configurable Keyboard (launch_1) Consumer Control as /devices/pci0000:00/0000:00:14.7/usb1/1-2/1-2.1/1-2.1.5/1-2.1.5:1.2/0003:3384:0001.0004/input/input6 [ 11.606775] input: System76 Launch Configurable Keyboard (launch_1) Keyboard as /devices/pci0000:00/0000:00:14.7/usb1/1-2/1-2.1/1-2.1.5/1-2.1.5:1.2/0003:3384:0001.0004/input/input7 [ 11.606818] hid-generic 0003:3384:0001.0004: input,hidraw3: USB HID v1.11 Keyboard [System76 Launch Configurable Keyboard (launch_1)] on usb-0000:00:14.7-2.1.5/input2 [ 12.100624] scsi 1:0:0:0: Direct-Access Realtek RTL9210B-CG 1.00 PQ: 0 ANSI: 6 [ 12.100727] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 12.102634] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 12.103623] sd 1:0:0:0: [sdb] Write Protect is off [ 12.103625] sd 1:0:0:0: [sdb] Mode Sense: 37 00 00 08 [ 12.104623] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 12.108709] sdb: sdb1 sdb2 [ 12.121614] sd 1:0:0:0: [sdb] Attached SCSI disk [ 12.518440] Console: switching to colour frame buffer device 240x67 [ 12.857500] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device [ 12.870631] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:00:01.0 on minor 0 [ 12.885550] ahci 0000:00:14.2: version 3.0 [ 12.885634] ahci 0000:00:14.2: apcie_assign_irqs(1) [ 12.885674] apcie_msi_init((____ptrval____), (____ptrval____), 31, 0x200, (____ptrval____)) [ 12.885682] ahci 0000:00:14.2: apcie_assign_irqs returning 1 [ 12.885714] ahci 0000:00:14.2: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl unknown mode [ 12.902494] ahci 0000:00:14.2: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 12.918586] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001c) mask=0x1 irq=31 hwirq=0x200 (____ptrval____) [ 12.918589] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 2, subfunc: 0, addr fee00000 data: 0x0000001c (28) [ 12.919508] scsi host2: ahci [ 12.924576] ata2: SATA max UDMA/133 abar m4096@0xc8001000 port 0xc8001100 irq 31 [ 12.940553] printk: console [netcon0] enabled [ 12.948485] netconsole: network logging started [ 12.958569] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.974554] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.988485] ALSA device list: [ 12.994523] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 12.998485] #0: HD-Audio Generic at 0xe4840000 irq 29 [ 12.999478] cfg80211: failed to load regulatory.db [ 13.010624] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000013) mask=0x80000 irq=20 hwirq=0x413 (____ptrval____) [ 13.010627] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 19, addr fee00000 data: 0x00000013 (19) [ 13.408428] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.421427] ata2.00: ATAPI: SONY PS-SYSTEM 420R, 6141, max UDMA/133 [ 13.435419] ata2.00: configured for UDMA/133 [ 13.446522] scsi 2:0:0:0: CD-ROM SONY PS-SYSTEM 420R 6141 PQ: 0 ANSI: 5 [ 13.493412] sr 2:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray [ 13.508403] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 13.518630] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 13.518706] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 13.530792] Freeing unused kernel image memory: 916K [ 13.531404] Write protecting the kernel read-only data: 22528k [ 13.533838] Freeing unused kernel image memory: 2012K [ 13.535933] Freeing unused kernel image memory: 1532K [ 13.536405] rodata_test: all tests were successful [ 13.537397] Run /init as init process
software/dmesg/playstation4_linux.txt ยท Last modified: 2022/11/13 12:06 by 127.0.0.1
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
