Site Tools


Sidebar

software:dmesg:star64

Star64 with RISC-V cpu

U-Boot SPL 2021.10 (Jan 19 2023 - 04:09:41 +0800)
DDR version: dc2e84f0.
Trying to boot from SPI

OpenSBI v1.2
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

Platform Name             : StarFive VisionFive V2
Platform Features         : medeleg
Platform HART Count       : 5
Platform IPI Device       : aclint-mswi
Platform Timer Device     : aclint-mtimer @ 4000000Hz
Platform Console Device   : uart8250
Platform HSM Device       : jh7110-hsm
Platform PMU Device       : ---
Platform Reboot Device    : pm-reset
Platform Shutdown Device  : pm-reset
Firmware Base             : 0x40000000
Firmware Size             : 288 KB
Runtime SBI Version       : 1.0

Domain0 Name              : root
Domain0 Boot HART         : 1
Domain0 HARTs             : 0*,1*,2*,3*,4*
Domain0 Region00          : 0x0000000002000000-0x000000000200ffff (I)
Domain0 Region01          : 0x0000000040000000-0x000000004007ffff ()
Domain0 Region02          : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address      : 0x0000000040200000
Domain0 Next Arg1         : 0x0000000042200000
Domain0 Next Mode         : S-mode
Domain0 SysReset          : yes

Boot HART ID              : 1
Boot HART Domain          : root
Boot HART Priv Version    : v1.11
Boot HART Base ISA        : rv64imafdcbx
Boot HART ISA Extensions  : none
Boot HART PMP Count       : 8
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 34
Boot HART MHPM Count      : 2
Boot HART MIDELEG         : 0x0000000000000222
Boot HART MEDELEG         : 0x000000000000b109


U-Boot 2021.10 (Jan 19 2023 - 04:09:41 +0800), Build: jenkins-github_visionfive2-6

CPU:   rv64imacu
Model: StarFive VisionFive V2
DRAM:  8 GiB
MMC:   sdio0@16010000: 0, sdio1@16020000: 1
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

StarFive EEPROM format v2

--------EEPROM INFO--------
Vendor : PINE64
Product full SN: STAR64V1-2310-D008E000-00000XXX
data version: 0x2
PCB revision: 0xc1
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:XX:XX:XX
Ethernet MAC1 address: 6c:cf:39:XX:XX:XX

In:    serial@10000000
Out:   serial@10000000
Err:   serial@10000000
Model: StarFive VisionFive V2
Net:   eth0: ethernet@16030000, eth1: ethernet@16040000
switch to partitions #0, OK
mmc1 is current device
found device 1
bootmode flash device 1
Failed to load 'uEnv.txt'
Can't set block device
Hit any key to stop autoboot:  0
1562 bytes read in 5 ms (304.7 KiB/s)
Importing environment from mmc1 ...
Can't set block device
## Warning: defaulting to text format
switch to partitions #0, OK
mmc1 is current device
15161340 bytes read in 641 ms (22.6 MiB/s)
## Loading kernel from FIT Image at a0000000 ...
   Using 'conf-starfive_jh7110-pine64-star64.dtb' configuration
   Trying 'kernel-1' kernel subimage
     Description:  Linux kernel
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0xa00000f0
     Data Size:    9767777 Bytes = 9.3 MiB
     Architecture: RISC-V
     OS:           Linux
     Load Address: 0x40200000
     Entry Point:  0x40200000
     Hash algo:    sha256
     Hash value:   6ff0b93eb70cc0074c0fd066fc2a4372a38db55176634d85a749b9a20e1cff83
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at a0000000 ...
   Using 'conf-starfive_jh7110-pine64-star64.dtb' configuration
   Trying 'ramdisk-1' ramdisk subimage
     Description:  star64-image-initramfs
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0xa095cb14
     Data Size:    5343011 Bytes = 5.1 MiB
     Architecture: RISC-V
     OS:           Linux
     Load Address: 0x46100000
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   15fe620edab644328b04e73539a4d035eb18337087479a6464c5f44cb295768f
   Verifying Hash Integrity ... sha256+ OK
   Loading ramdisk from 0xa095cb14 to 0x46100000
## Loading fdt from FIT Image at a0000000 ...
   Using 'conf-starfive_jh7110-pine64-star64.dtb' configuration
   Trying 'fdt-starfive_jh7110-pine64-star64.dtb' fdt subimage
     Description:  Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xa0950d78
     Data Size:    48314 Bytes = 47.2 KiB
     Architecture: RISC-V
     Load Address: 0x46000000
     Hash algo:    sha256
     Hash value:   4c332080330ea9f21f3263a5f6111f01511a3661f10af4b4d0ca65e4a10fd849
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0xa0950d78 to 0x46000000
   Booting using the fdt blob at 0x46000000
   Uncompressing Kernel Image
## Error: "cpu_vol_set" not defined
Booting kernel in
## Flattened Device Tree blob at 46000000
   Booting using the fdt blob at 0x46000000
   Using Device Tree in place at 0000000046000000, end 000000004600efff

Starting kernel ...

clk u5_dw_i2c_clk_core already disabled
clk u5_dw_i2c_clk_apb already disabled
[    0.000000] Linux version 5.15.115 (oe-user@oe-host) (riscv64-pine64-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP Sat Jun 10 09:56:27 UTC 2023
[    0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[    0.000000] Machine model: Pine64 Star64
[    0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[    0.000000] printk: bootconsole [sbi0] enabled
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 512 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000040200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000c010ffff]
[    0.000000]   node   0: [mem 0x00000000c0110000-0x00000000c01fffff]
[    0.000000]   node   0: [mem 0x00000000c0200000-0x000000023fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000023fffffff]
[    0.000000] SBI specification v1.0 detected
[    0.000000] SBI implementation ID=0x1 Version=0x10002
[    0.000000] SBI TIME extension detected
[    0.000000] SBI IPI extension detected
[    0.000000] SBI RFENCE extension detected
[    0.000000] SBI SRST extension detected
[    0.000000] SBI v0.2 HSM extension detected
[    0.000000] CPU with hartid=0 is not available
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv: base ISA extensions acdfim
[    0.000000] riscv: ELF capabilities acdfim
[    0.000000] percpu: Embedded 18 pages/cpu s34088 r8192 d31448 u73728
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2067975
[    0.000000] Kernel command line: earlyprintk console=tty1 console=ttyS0,115200 rootwait earlycon=sbi root=/dev/mmcblk1p4
[    0.000000] Unknown kernel command line parameters "earlyprintk", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 7570656K/8386560K available (10959K kernel code, 7222K rwdata, 6144K rodata, 2185K init, 405K bss, 291616K reserved, 524288K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu:     RCU debug extended QS entry/exit.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] CPU with hartid=0 is not available
[    0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
[    0.000000] riscv-intc: 64 local interrupts mapped
[    0.000000] plic: plic@c000000: mapped 136 interrupts with 4 handlers for 9 contexts.
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 881590404240 ns
[    0.000001] sched_clock: 64 bits at 4MHz, resolution 250ns, wraps every 2199023255500ns
[    0.008240] clocksource: timer@13050000.ch0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.018439] clocksource: timer@13050000.ch1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.028753] clocksource: timer@13050000.ch2: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.039067] clocksource: timer@13050000.ch3: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.049644] Console: colour dummy device 80x25
[    0.054525] printk: console [tty1] enabled
[    0.058576] Calibrating delay loop (skipped), value calculated using timer frequency.. 8.00 BogoMIPS (lpj=40000)
[    0.068778] pid_max: default: 32768 minimum: 301
[    0.073773] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.081430] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.091157] ASID allocator disabled
[    0.094702] rcu: Hierarchical SRCU implementation.
[    0.100419] smp: Bringing up secondary CPUs ...
[    0.106835] smp: Brought up 1 node, 4 CPUs
[    0.112824] devtmpfs: initialized
[    0.124536] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.134320] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.154754] pinctrl core: initialized pinctrl subsystem
[    0.161295] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.167857] thermal_sys: Registered thermal governor 'step_wise'
[    0.168209] cpuidle: using governor menu
[    0.200503] platform soc:dsi-output: Fixing up cyclic dependency with 29400000.dc8200
[    0.208795] platform 295d0000.mipi: Fixing up cyclic dependency with soc:dsi-output
[    0.216798] platform 29590000.hdmi: Fixing up cyclic dependency with 29400000.dc8200
[    0.265612] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.272235] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.283002] vgaarb: loaded
[    0.285887] SCSI subsystem initialized
[    0.289785] usbcore: registered new interface driver usbfs
[    0.295225] usbcore: registered new interface driver hub
[    0.300601] usbcore: registered new device driver usb
[    0.305999] mc: Linux media interface: v0.10
[    0.310215] videodev: Linux video capture interface: v2.00
[    0.316003] Advanced Linux Sound Architecture Driver Initialized.
[    0.323006] clocksource: Switched to clocksource riscv_clocksource
[    0.337310] NET: Registered PF_INET protocol family
[    0.343319] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.358611] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    0.367380] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.375073] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.383777] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.393414] TCP: Hash tables configured (established 65536 bind 65536)
[    0.400150] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    0.407256] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    0.415126] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.421324] RPC: Registered named UNIX socket transport module.
[    0.427183] RPC: Registered udp transport module.
[    0.431924] RPC: Registered tcp transport module.
[    0.436711] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.443956] PCI: CLS 0 bytes, default 64
[    0.448859] Initialise system trusted keyrings
[    0.453264] Unpacking initramfs...
[    0.457394] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    0.471280] NFS: Registering the id_resolver key type
[    0.476337] Key type id_resolver registered
[    0.480504] Key type id_legacy registered
[    0.484708] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.491342] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.498881] ntfs: driver 2.1.32 [Flags: R/W].
[    0.503523] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.510043] fuse: init (API version 7.34)
[    0.553092] NET: Registered PF_ALG protocol family
[    0.557843] Key type asymmetric registered
[    0.561978] Asymmetric key parser 'x509' registered
[    0.567046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.574405] io scheduler mq-deadline registered
[    0.578963] io scheduler kyber registered
[    0.683685] clk-starfive-jh7110 13020000.clock-controller: starfive JH7110 clkgen init successfully.
[    0.694042] L2CACHE: DataError @ 0x00000000.08040140
[    0.699000] L2CACHE: DataFail @ 0x00000000.0804005B
[    0.703994] L2CACHE: No. of Banks in the cache: 8
[    0.708645] L2CACHE: No. of ways per bank: 16
[    0.713084] L2CACHE: Sets per bank: 256
[    0.716963] L2CACHE: Bytes per cache block: 64
[    0.721468] L2CACHE: Index of the largest way enabled: 15
[    0.724961] Initramfs unpacking failed: invalid magic at start of compressed archive
[    0.727257] jh7110-pmu 17030000.power-controller: registered 8 power domains
[    0.755626] Freeing initrd memory: 14804K
[    0.819438] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    0.829421] @@#########################@@
[    0.840114] @@ dev ptr:ffffffe0bff3ac00/1500/1
[    0.844761] PVR_K:  1: Read BVNC 36.50.54.182 from HW device registers
[    0.851262] PVR_K:  1: RGX Device registered BVNC 36.50.54.182 with 1 core in the system
[    0.860595] PVR_K:  1: RGX Firmware image 'rgx.fw.36.50.54.182' loaded
[    0.870649] PVR_K:  1: Shader binary image 'rgx.sh.36.50.54.182' loaded
[    0.879290] [drm] Initialized pvr 1.17.6210866 20170530 for 18000000.gpu on minor 0
[    0.896420] loop: module loaded
[    0.901715] spi-nor spi0.0: gd25lq128d (16384 Kbytes)
[    0.913071] 3 fixed-partitions partitions found on MTD device 13010000.spi.0
[    0.920048] Creating 3 MTD partitions on "13010000.spi.0":
[    0.925623] 0x000000000000-0x000000040000 : "spl"
[    0.932013] 0x000000100000-0x000000400000 : "uboot"
[    0.938468] 0x000000f00000-0x000001000000 : "data"
[    0.947115] CAN device driver interface
[    0.951840] starfive-eth-plat 16030000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    0.959288] starfive-eth-plat 16030000.ethernet:     DWMAC4/5
[    0.964815] starfive-eth-plat 16030000.ethernet: DMA HW capability register supported
[    0.972684] starfive-eth-plat 16030000.ethernet: RX Checksum Offload Engine supported
[    0.980581] starfive-eth-plat 16030000.ethernet: Wake-Up On Lan supported
[    0.987505] starfive-eth-plat 16030000.ethernet: TSO supported
[    0.993320] starfive-eth-plat 16030000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.001719] starfive-eth-plat 16030000.ethernet: Enabled L3L4 Flow TC (entries=1)
[    1.009273] starfive-eth-plat 16030000.ethernet: Enabled RFS Flow TC (entries=8)
[    1.016728] starfive-eth-plat 16030000.ethernet: TSO feature enabled
[    1.023135] starfive-eth-plat 16030000.ethernet: Using 40 bits DMA width
[    1.268417] YT8531 Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    1.278309] YT8531 Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    1.290011] starfive-eth-plat 16040000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[    1.297451] starfive-eth-plat 16040000.ethernet:     DWMAC4/5
[    1.302964] starfive-eth-plat 16040000.ethernet: DMA HW capability register supported
[    1.310866] starfive-eth-plat 16040000.ethernet: RX Checksum Offload Engine supported
[    1.318755] starfive-eth-plat 16040000.ethernet: Wake-Up On Lan supported
[    1.325666] starfive-eth-plat 16040000.ethernet: TSO supported
[    1.331477] starfive-eth-plat 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.339908] starfive-eth-plat 16040000.ethernet: Enabled L3L4 Flow TC (entries=1)
[    1.347443] starfive-eth-plat 16040000.ethernet: Enabled RFS Flow TC (entries=8)
[    1.354895] starfive-eth-plat 16040000.ethernet: TSO feature enabled
[    1.361290] starfive-eth-plat 16040000.ethernet: Using 40 bits DMA width
[    1.605303] YT8531 Gigabit Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
[    1.615183] YT8531 Gigabit Ethernet stmmac-1:01: attached PHY driver (mii_bus:phy_addr=stmmac-1:01, irq=POLL)
[    1.627112] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.633600] ehci-pci: EHCI PCI platform driver
[    1.638114] ehci-platform: EHCI generic platform driver
[    1.644073] usbcore: registered new interface driver cdc_acm
[    1.649655] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.657781] usbcore: registered new interface driver cdc_wdm
[    1.683484] starfive-rtc 17040000.rtc: registered as rtc0
[    1.688960] i2c_dev: i2c /dev entries driver
[    1.693433] usbcore: registered new interface driver uvcvideo
[    1.713039] thermal thermal_zone0: failed to read out thermal zone (-110)
[    1.720076] starfive-wdt 13070000.wdog: Heartbeat: timeout=15, count/2=180000000 (0aba9500)
[    1.729700] sdhci: Secure Digital Host Controller Interface driver
[    1.735833] sdhci: Copyright(c) Pierre Ossman
[    1.740253] Synopsys Designware Multimedia Card Interface Driver
[    1.746638] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.752744] ledtrig-cpu: registered to indicate activity on CPUs
[    1.759178] jh7110-sec 16000000.crypto: Unable to request sec_m dma channel in DMA channel
[    1.767392] jh7110-sec 16000000.crypto: Cannot initial dma chan
[    1.773663] usbcore: registered new interface driver usbhid
[    1.779158] usbhid: USB HID core driver
[    1.783164] usbcore: registered new interface driver rtl8852bu
[    1.789178] riscv-pmu-sbi: SBI PMU extension is available
[    1.794527] riscv-pmu-sbi: 16 firmware and 4 hardware counters
[    1.800381] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available
[    1.810215] usbcore: registered new interface driver snd-usb-audio
[    1.818519] NET: Registered PF_INET6 protocol family
[    1.824812] Segment Routing with IPv6
[    1.828458] In-situ OAM (IOAM) with IPv6
[    1.832466] NET: Registered PF_PACKET protocol family
[    1.837544] can: controller area network core
[    1.842003] NET: Registered PF_CAN protocol family
[    1.846796] can: raw protocol
[    1.849809] can: broadcast manager protocol
[    1.854080] can: netlink gateway - max_hops=1
[    1.858958] 9pnet: Installing 9P2000 support
[    1.863259] Key type dns_resolver registered
[    1.868372] Loading compiled-in X.509 certificates
[    1.910512] starfive_jh7110-pinctrl 13040000.gpio: SiFive GPIO chip registered 64 GPIOs
[    1.919273] starfive_jh7110-pinctrl 17020000.gpio: SiFive GPIO chip registered 4 GPIOs
[    1.927366] pl08xdmac 16008000.sec_dma: initialized 8 virtual memcpy channels
[    1.934469] pl08xdmac 16008000.sec_dma: initialized 16 virtual slave channels
[    1.943615] debugfs: Directory '16008000.sec_dma' with parent 'dmaengine' already present!
[    1.951819] pl08xdmac 16008000.sec_dma: DMA: PL080 rev0 at 0x16008000 irq 23
[    1.959190] ssp-pl022 10060000.spi: ARM PL022 driver for StarFive SoC platform, device ID: 0x00041022
[    1.968377] ssp-pl022 10060000.spi: mapped registers from 0x0000000010060000 to (____ptrval____)
[    1.977648] ssp-pl022 10060000.spi: Requested frequency: 10000000 Hz is unsupported,select by default 8250000 Hz
[    1.988190] ssp-pl022 10060000.spi: will use autosuspend for runtime pm, delay 100ms
[    1.999799] rtc-hym8563 2-0051: no valid clock/calendar values available
[    2.006669] rtc-hym8563 2-0051: registered as rtc1
[    2.012352] rtc-hym8563 2-0051: no valid clock/calendar values available
[    2.018995] rtc-hym8563 2-0051: hctosys: unable to read the hardware clock
[    2.028053] at24 5-0050: supply vcc not found, using dummy regulator
[    2.035204] at24 5-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[    2.044403] axp15060-regulator 5-0036: Register mipi_0p9 done! vol range:900 ~ 900 mV
[    2.054095] axp15060-regulator 5-0036: Register hdmi_1p8 done! vol range:1800 ~ 1800 mV
[    2.063953] axp15060-regulator 5-0036: Register sdio_vdd done! vol range:1800 ~ 1800 mV
[    2.073812] axp15060-regulator 5-0036: Register hdmi_0p9 done! vol range:900 ~ 900 mV
[    2.083507] axp15060-regulator 5-0036: Register vcc_3v3 done! vol range:3300 ~ 3300 mV
[    2.093760] axp15060-regulator 5-0036: Register cpu_vdd done! vol range:500 ~ 1540 mV
[    2.104627] pcie_plda 2c000000.pcie: Failed to get power-gpio, but maybe it's always on.
[    2.112814] pcie_plda 2c000000.pcie: host bridge /soc/pcie@2C000000 ranges:
[    2.119771] pcie_plda 2c000000.pcie:      MEM 0x0038000000..0x003fffffff -> 0x0038000000
[    2.127892] pcie_plda 2c000000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    2.136062] ATR entry: 0x09c0000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[    2.143823] ATR entry: 0x0038000000 -> 0x0038000000 [0x0008000000] (param: 0x000000)
[    2.151603] ATR entry: 0x0980000000 -> 0x0980000000 [0x0040000000] (param: 0x000000)
[    2.573274] pcie_plda 2c000000.pcie: Port link down, exit.
[    2.592441] clk-starfive-jh7110-vout 295c0000.clock-controller: starfive JH7110 clk_vout init successfully.
[    2.613887] clk-starfive-jh7110-isp 19810000.clock-controller: starfive JH7110 clk_isp init successfully.
[    2.624107] dw_axi_dmac_platform 16050000.dma-controller: DesignWare AXI DMA Controller, 4 channels
[    2.667489] printk: console [ttyS0] enabled0x10000000 (irq = 17, base_baud = 1500000) is a 16550A
[    2.667489] printk: console [ttyS0] enabled
[    2.675783] printk: bootconsole [sbi0] disabled
[    2.675783] printk: bootconsole [sbi0] disabled
[    2.686924] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.692448] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    2.700452] xhci-hcd xhci-hcd.1.auto: hcc params 0x200073c8 hci version 0x100 quirks 0x0000002000018010
[    2.709915] xhci-hcd xhci-hcd.1.auto: irq 53, io mem 0x10110000
[    2.716101] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.721610] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    2.729305] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.736678] hub 1-0:1.0: USB hub found
[    2.740478] hub 1-0:1.0: 1 port detected
[    2.744947] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.753783] hub 2-0:1.0: USB hub found
[    2.757580] hub 2-0:1.0: 1 port detected
[    2.762109] cdns3-starfive 10210000.usbdrd: usb mode 1 3.0 probe success
[    2.769057] jh7110-vin 19800000.vin_sysctl: stfcamss probe enter!
[    2.778700] jh7110-vin 19800000.vin_sysctl: stfcamss probe success!
[    2.796309] jh7110-sec 16000000.crypto: will run requests pump with realtime priority
[    2.796463] dwmmc_starfive 16020000.sdio1: IDMAC supports 32-bit address mode.
[    2.796464] dwmmc_starfive 16010000.sdio0: IDMAC supports 32-bit address mode.
[    2.796492] dwmmc_starfive 16010000.sdio0: Using internal DMA controller.
[    2.796499] dwmmc_starfive 16010000.sdio0: Version ID is 290a
[    2.796526] dwmmc_starfive 16010000.sdio0: DW MMC controller at irq 29,32 bit host data width,32 deep fifo
[    2.805186] mmc_host mmc0: card is non-removable.
[    2.811382] dwmmc_starfive 16020000.sdio1: Using internal DMA controller.
[    2.815458] jh7110-sec 16000000.crypto: Initialized
[    2.816622] starfive-i2s 120b0000.i2stx_4ch0:  designware: play supported
[    2.816633] starfive-i2s 120b0000.i2stx_4ch0: designware: i2s master mode supported
[    2.817190] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe begin
[    2.817201] sf-mipi-dphy-tx 295e0000.mipi-dphy: ===> sf_dphy_probe enter, 445
[    2.817350] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO
[    2.817373] sf-mipi-dphy-tx 295e0000.mipi-dphy: supply mipi_1p8 not found, using dummy regulator
[    2.817689] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe end
[    2.817893] cdns-dsi 295d0000.mipi: dsi_sys_clk = 297000000
[    2.818147] cdns-dsi 295d0000.mipi: starfive dsi bind end
[    2.821189] of_cfs_init
[    2.825445] dwmmc_starfive 16020000.sdio1: Version ID is 290a
[    2.831280] of_cfs_init: OK
[    2.840907] dwmmc_starfive 16020000.sdio1: DW MMC controller at irq 30,32 bit host data width,32 deep fifo
[    2.846226] starfive-pwmdac 100b0000.pwmdac: clk_apb0 = 49500000, clk_pwmdac_apb = 49500000, clk_pwmdac_core = 4068493
[    2.852624] mmc_host mmc1: card is polling.
[    2.857904] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.033035] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    3.033036] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    3.064658] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.071333] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.079990] cfg80211: failed to load regulatory.db
[    3.093020] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248)
[    3.235049] hub 1-1:1.0: USB hub found
[    3.238935] hub 1-1:1.0: 4 ports detected
[    3.322002] starfive soc:display-subsystem: bound 29400000.dc8200 (ops 0xffffffff81078878)
[    3.330424] innohdmi-starfive 29590000.hdmi: inno hdmi bind begin
[    3.339467] innohdmi-starfive 29590000.hdmi: [drm:inno_hdmi_bind] registered Inno HDMI I2C bus driver success
[    3.350190] innohdmi-starfive 29590000.hdmi: HDMI&AUDIO register done.
[    3.356953] innohdmi-starfive 29590000.hdmi: inno hdmi bind end
[    3.362976] starfive soc:display-subsystem: bound 29590000.hdmi (ops 0xffffffff81079610)
[    3.371259] vs-simple-encoder soc:dsi-output: encoder_bind begin
[    3.377474] no panel, -517
[    3.380271] vs-simple-encoder soc:dsi-output: encoder_bind error
[    3.386388] starfive soc:display-subsystem: bound soc:dsi-output (ops 0xffffffff81079258)
[    3.396491] [drm] Initialized starfive 1.0.0 20191101 for soc:display-subsystem on minor 1
[    3.408490] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 50000000Hz, actual 49500000HZ div = 2)
[    3.418538] mmc1: new high speed SDHC card at address 0001
[    3.425963] mmcblk1: mmc1:0001 SD16G 14.9 GiB
[    3.483103] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 300000Hz, actual 300000HZ div = 330)
[    3.683103] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[    3.905781] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes
[    3.915366] hub 1-1.1:1.0: USB hub found
[    3.919488] hub 1-1.1:1.0: 4 ports detected
[    4.133042] usb 1-1.2: new high-speed USB device number 4 using xhci-hcd
[    4.415027] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes
[    4.927497] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes
[    4.938254] eric-tx CALL alloc_txring !!!!
[    4.940939] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    4.949776] GPT:3781225 != 31223807
[    4.953281] GPT:Alternate GPT header not at the end of the disk.
[    4.959282] GPT:3781225 != 31223807
[    4.962768] GPT: Use GNU Parted to correct GPT errors.
[    4.967939]  mmcblk1: p1 p2 p3 p4
[    5.153182] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000Hz, actual 200000HZ div = 495)
[    5.603128] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 100000Hz, actual 100000HZ div = 990)
[    6.003068] ALSA device list:
[    6.006070]   #0: Starfive-PWMDAC-Sound-Card
[    6.010367]   #1: Starfive-HDMI-Sound-Card
[    6.019527] Freeing unused kernel image (initmem) memory: 2184K
[    6.025815] Run /init as init process
[    6.179217] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    6.638036] systemd[1]: System time before build time, advancing clock.
[    6.722248] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[    6.753915] systemd[1]: Detected architecture riscv64.

Welcome to PinIx 1.3 (pinix)!

[    6.804945] systemd[1]: Hostname set to <star64>.
[    6.826347] systemd[1]: Initializing machine ID from random generator.
[    6.932610] systemd-sysv-generator[280]: SysV service '/etc/init.d/rc.pvr' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    7.488621] systemd[1]: Queued start job for default target Multi-User System.
[    7.508535] systemd[1]: Created slice Slice /system/getty.
[  OK  ] Created slice Slice /system/getty.
[    7.545823] systemd[1]: Created slice Slice /system/modprobe.
[  OK  ] Created slice Slice /system/modprobe.
[    7.584376] systemd[1]: Created slice Slice /system/serial-getty.
[  OK  ] Created slice Slice /system/serial-getty.
[    7.624621] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    7.663893] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[    7.703365] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[    7.744379] systemd[1]: Reached target Host and Network Name Lookups.
[  OK  ] Reached target Host and Network Name Lookups.
[    7.783378] systemd[1]: Reached target Path Units.
[  OK  ] Reached target Path Units.
[    7.813240] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    7.853450] systemd[1]: Reached target Slice Units.
[  OK  ] Reached target Slice Units.
[    7.893248] systemd[1]: Reached target Swaps.
[  OK  ] Reached target Swaps.
[    7.949850] systemd[1]: Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[    7.993582] systemd[1]: Reached target RPC Port Mapper.
[  OK  ] Reached target RPC Port Mapper.
[    8.034414] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    8.092978] systemd[1]: Listening on Process Core Dump Socket.
[  OK  ] Listening on Process Core Dump Socket.
[    8.133825] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[    8.179963] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[    8.191603] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    8.234354] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    8.274813] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    8.313584] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    8.354241] systemd[1]: Listening on User Database Manager Socket.
[  OK  ] Listening on User Database Manager Socket.
[    8.399611] systemd[1]: Mounting Huge Pages File System...
         Mounting Huge Pages File System...
[    8.436075] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    8.475919] systemd[1]: Mounting Kernel Debug File System...
         Mounting Kernel Debug File System...
[    8.514090] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[    8.531076] systemd[1]: Mounting Temporary Directory /tmp...
         Mounting Temporary Directory /tmp...
[    8.567087] systemd[1]: Starting Create List of Static Device Nodes...
         Starting Create List of Static Device Nodes...
[    8.608126] systemd[1]: Starting Load Kernel Module configfs...
         Starting Load Kernel Module configfs...
[    8.649476] systemd[1]: Starting Load Kernel Module drm...
         Starting Load Kernel Module drm...
[    8.686828] systemd[1]: Starting Load Kernel Module fuse...
         Starting Load Kernel Module fuse...
[    8.738670] systemd[1]: Starting Start psplash boot splash screen...
         Starting Start psplash boot splash screen...
[    8.777850] systemd[1]: Starting RPC Bind...
         Starting RPC Bind...
[    8.813519] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[    8.834328] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    8.885954] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
[    8.896775] systemd[1]: Mounting NFSD configuration filesystem...
         Mounting NFSD configuration filesystem...
[    8.935472] systemd[1]: Starting Generate network units from Kernel command line...
         Starting Generate network …ts from Kernel command line...
[    8.975312] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems EXT4-fs (mmcblk1p4): re-mounted. Opts: (null). Quota mode: disabled.
[0m...
[    9.025221] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[    9.056103] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    9.065442] systemd[1]: Starting Coldplug All udev Devices...
         Starting Coldplug All udev Devices...
[    9.120512] systemd[1]: Started RPC Bind.
[  OK  ] Started RPC Bind.
[    9.153479] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted Temporary Directory /tmp.
[  OK  ] Finished Create List of Static Device Nodes.
[  OK  ] Finished Load Kernel Module configfs.
[  OK  ] Finished Load Kernel Module drm.
[  OK  ] Finished Load Kernel Module fuse.
[FAILED] Failed to start Start psplash boot splash screen.
See 'systemctl status psplash-start.service' for details.
[DEPEND] Dependency failed for Star…progress communication helper.
[  OK  ] Mounted NFSD configuration filesystem.
[  OK  ] Finished Generate network units from Kernel command line.
[  OK  ] Finished Remount Root and Kernel File Systems.
[  OK  ] Finished Apply Kernel Variables.
         Mounting FUSE Control File System...
         Mounting Kernel Configuration File System...
         Starting Flush Journal to Persistent Storage...
[    9.789857] systemd-journald[296]: Received client request to flush runtime journal.
         Starting Create System Users...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Finished Flush Journal to Persistent Storage.
[  OK  ] Finished Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Finished Create Static Device Nodes in /dev.
[  OK  ] Finished Coldplug All udev Devices.
[  OK  ] Reached target Preparation for Local File Systems.
         Mounting /var/volatile...
         Starting Rule-based Manage…for Device Events and Files...
[  OK  ] Mounted /var/volatile.
         Starting Load/Save Random Seed...
[  OK  ] Started Rule-based Manager for Device Events and Files.
[   10.493351] vdec: loading out-of-tree module taints kernel.
[   10.496101] venc: loading out-of-tree module taints kernel.
[   10.497788] jpu: loading out-of-tree module taints kernel.
[   10.498894] cnm_jpu 13090000.jpu: init device.
[   10.501977] vdec 130a0000.vpu_dec: device init.
[   10.511165] SUCCESS alloc_chrdev_region
[   10.514536] SUCCESS alloc_chrdev_region
[   10.538484] mailbox 13060000.mailbox: Mailbox enabled
[   10.731715] mailbox_test soc:mailbox_client@0: invalid resource
[   10.737723] mailbox_test soc:mailbox_client@0: invalid resource
[   10.743770] mailbox_test soc:mailbox_client@0: Successfully registered
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Found device /dev/disk/by-label/boot.
[   11.410871] Bluetooth: Core ver 2.22
[   11.414547] NET: Registered PF_BLUETOOTH protocol family
[   11.419859] Bluetooth: HCI device and connection manager initialized
[   11.426297] Bluetooth: HCI socket layer initialized
[   11.431180] Bluetooth: L2CAP socket layer initialized
[   11.436299] Bluetooth: SCO socket layer initialized
[   11.469421] usbcore: registered new interface driver btusb
[   11.476478] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
[   11.488841] Bluetooth: hci0: RTL: rom_version status=0 version=1
[   11.494879] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
[   11.506134] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
[   11.513545] Bluetooth: hci0: RTL: cfg_sz 6, total sz 38955
[   11.746451] Bluetooth: hci0: RTL: fw version 0xdfb791cb
         Mounting /boot...
         Starting Start psplash boot splash screen...
[FAILED] Failed to start Start psplash boot splash screen.
See 'systemctl status psplash-start.service' for details.
[DEPEND] Dependency failed for Star…progress communication helper.
[  OK  ] Mounted /boot.
[   12.213016] random: crng init done
[  OK  ] Reached target Local File Systems.
         Starting Rebuild Dynamic Linker Cache...
         Starting Create Volatile Files and Directories...
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Run pending postinsts...
         Starting Rebuild Journal Catalog...
         Starting Network Time Synchronization...
         Starting Record System Boot/Shutdown in UTMP...
[  OK  ] Finished Record System Boot/Shutdown in UTMP.
[  OK  ] Finished Rebuild Journal Catalog.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Set.
[  OK  ] Finished Rebuild Dynamic Linker Cache.
         Starting Update is Completed...
[  OK  ] Finished Update is Completed.
[  OK  ] Finished Run pending postinsts.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timer Units.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
         Starting sshd.socket...
[  OK  ] Listening on sshd.socket.
[  OK  ] Reached target Socket Units.
[  OK  ] Reached target Basic System.
         Starting Save/Restore Sound Card State...
[  OK  ] Started Job spooling tools.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Bluetooth service...
[  OK  ] Started Periodic Command Scheduler.
         Starting D-Bus System Message Bus...
         Starting Network Time Service (one-shot ntpdate mode)...
[  OK  ] Started System Logging Service.
         Starting User Login Management...
         Starting OpenSSH Key Generation...
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Finished Save/Restore Sound Card State.
[  OK  ] Finished Network Time Service (one-shot ntpdate mode).
[  OK  ] Reached target Sound Card.
         Starting firewalld - dynamic firewall daemon...
[  OK  ] Started Bluetooth service.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started User Login Management.
[  OK  ] Reached target Bluetooth Support.
         Starting Hostname Service...
[  OK  ] Started Hostname Service.
[  OK  ] Started firewalld - dynamic firewall daemon.
[  OK  ] Reached target Preparation for Network.
         Starting Network Manager...
[  OK  ] Started Network Manager.
[  OK  ] Reached target Network.
         Starting DNS forwarder and DHCP server...
[  OK  ] Started NFS status monitor for NFSv2/3 locking..
[  OK  ] Started Respond to IPv6 Node Information Queries.
[  OK  ] Started Network Router Discovery Daemon.
         Starting Permit User Sessions...
[  OK  ] Finished
star64 login:
software/dmesg/star64.txt · Last modified: 2023/07/30 09:46 by chris